Blog
-
About Needle Roller Bearings
The roller needle roller bearing is composed of a bolt as the inner raceway of the roller set and a thick-walled outer ring. The shoulder of the bolt shaft and ...Read more -
What is plain shaft
Plain shafts are mechanical components responsible for propelling movement, either sliding movement or rotational, between two parts of a machine.Their main pur...Read more -
Precautions for choosing LM Plain shaft special standard shaft
For linear bearings, since steel balls move directly on the surface of the shaft,attention should be paid to its hardness, surface thickness and dimensional acc...Read more -
Plain shaft:Felt gasket FLM type
Felt gasket FLM typeLinear motion bearing LM type, there is a sealed type equipped with a special synthetic rubber gasket(LM..UU,U), but when further emphasizin...Read more -
Life design of ball screw
(1)Ball screw lifeEven if the ball screw is used in the correct condition,it will become unusable after a certain period of time.The life of the ball screw is t...Read more -
Precautions for using ball screw
(1)LubricationWhen using ball screws, it is necessary to have sufficient lubrication. If the lubrication is not sufficient, contact with metal may occur, leadin...Read more -
Accuracy of installation position of ball screw
The necessary items for the accuracy of the installation position of the ball screw are as follows:(1) Measure the circumferential deviation value in the radial...Read more -
How are Linear Guides used
Linear guides are used in various ways depending on the specific application and industry.Here are some common use cases and methods of implementing linear guid...Read more -
What is Linear Guide
Linear guides are mechanical systems designed to facilitate precise linear motion along a specific path.They consist of two main components: a rail or track and...Read more -
Performance Of Radial Bearings
Contact surface combinationValue of load ratioCd/PSteel/steel2Steel/bronze2Steel/PTFE fabric1.75Steel/PTFE composite material2Steel/copper alloy2Contact surface...Read more