Joint bearing is dominated by an inner and outer sphere within a spherical outer ring,can withstand a greater load.According to

their different types and structures that can withstand the radial load,axial load or radial,axial joint load.Since the inner

surface of the outer sphere inlaid composite materials,so that the work can be generated in the bearing selflubricating.Generally

used for slower swing movement,but also for the tilt angle within a certain range of motion,when the supporting shaft and shaft

misalignment large shell hole,still work properly.Self-lubricating auxiliary bearing joints used in water conservancy, specialized

machinery and other industries. 

Features

1. Bearings with a stretching rod, stretching with right or left-hand male thread.

2. To plate zinc on the surface of rod body, the housing with a lubricartion hole or a grease nipple.

3. Rod ends permissible operating temperature, are available on - 30 °C to + 80 °C temperature range of use, and keep the right to

bear ability.

4. Using high-quality materials and advanced manufacturing techniques to minimize wear, 

reduce friction, and maximize load-carrying capacity.

Outer ring with single split in axial direction.

Inner ring with cylindrical extension at either side.

Outer ring of type-2RS with two seales.

Lubricntion grooves and holes in the outer and inner rings,

both outer and inner rings are properly phosphate treated.